pilot plant for kombisorbon® Validation Testing and Optimization

The Kombisorbon® pilot plant mainly consists of following parts:

  • Raw gas inlet.
    Can be used with gas temperatures up to well above 100°C.
  • A fabric filter is installed before the reactor and retains back dust particles in the off-gas.
  • One adsorber reactor
  • One blower
  • The clean gas is released into the environment by a vertically positioned duct next to the plant.
  • Measuring devices (inlet/outlet) for mercury, dioxins, dust, as well as temperature, pressure, pressure difference, and flow rate.
  • Electric control cabinet for control, operation and monitoring instruments